Ga naar hoofdinhoud

Hoe ontbrekende te herstellen Voer een scriptoptie uit in de Outlook-regel?

In bepaalde versies van Outlook, vooral in recente updates, is de optie "Een script uitvoeren" mogelijk standaard uitgeschakeld als veiligheidsmaatregel. Om de optie "Een script uitvoeren" in Outlook te activeren, waardoor het maken van regels met VBA-scripts mogelijk wordt, moet u doorgaans specifieke registerinstellingen wijzigen. Lees verder voor gedetailleerde instructies over hoe u dit kunt doen.

Schakel de ontbrekende optie 'Een script uitvoeren' in Outlook in

Om de ontbrekende voer een script uit optie in de Outlook-regelswizard, zorg er eerst voor dat Outlook is geslotenen ga vervolgens verder met de volgende stappen:

  1. Druk op de Win + R sleutels samen om de te openen lopen dialoog venster. Typ in dit dialoogvenster regedit en klik vervolgens op de OK knop.
  2. In het eruit springen User Account Control dialoogvenster, klik dan op het Ja knop.
  3. In het register-editor venster, navigeer naar het onderstaande pad om toegang te krijgen tot het Security instelling: HKEY_CURRENT_USER \ Software \ Microsoft \ Office \ 16.0 \ Outlook \ Security
  4. Klik met de rechtermuisknop op de Security toets en selecteer New > DWORD (32-bits)-waarde.
  5. Noem de gemaakte DWORD als InschakelenOnveiligeClientMailRegels.
  6. Dubbelklik op de InschakelenOnveiligeClientMailRegels DWORD om het Bewerk DWORD (32-bit) -waarde dialoog venster. Type 1 in de Waarde op vak en klik OK.
  7. Start uw Microsoft Outlook opnieuw op.

Door de hierboven beschreven stappen te volgen, kunt u de optie "een script uitvoeren" vinden en gebruiken bij het maken van regels in Outlook.

Gerelateerde artikelen

Beste Office-productiviteitstools

Kutools for Outlook - Meer dan 100 krachtige functies om uw Outlook een boost te geven

🤖 AI Mail-assistent: Directe professionele e-mails met AI-magie: met één klik geniale antwoorden, perfecte toon, meertalige beheersing. Transformeer e-mailen moeiteloos! ...

???? Email Automation: Niet aanwezig (beschikbaar voor POP en IMAP)  /  Plan het verzenden van e-mails  /  Automatische CC/BCC volgens regels bij het verzenden van e-mail  /  Automatisch doorsturen (geavanceerde regels)   /  Begroeting automatisch toevoegen   /  Splits e-mails van meerdere ontvangers automatisch op in individuele berichten ...

📨 email management: Gemakkelijk e-mails herinneren  /  Blokkeer zwendel-e-mails van onderwerpen en anderen  /  Verwijder dubbele e-mails  /  Uitgebreid Zoeken  /  Consolideer mappen ...

📁 Bijlagen Pro: Batch opslaan  /  Batch losmaken  /  Batchcompressie  /  Automatisch opslaan   /  Automatisch loskoppelen  /  Automatisch comprimeren ...

???? Interface-magie: 😊Meer mooie en coole emoji's   /  Verhoog uw Outlook-productiviteit met weergaven met tabbladen  /  Minimaliseer Outlook in plaats van te sluiten ...

???? Wonderen met één klik: Beantwoord iedereen met inkomende bijlagen  /   Antiphishing-e-mails  /  🕘Toon de tijdzone van de afzender ...

👩🏼‍🤝‍👩🏻 Contacten en agenda: Batchcontacten toevoegen uit geselecteerde e-mails  /  Splits een contactgroep in individuele groepen  /  Verwijder verjaardagsherinneringen ...

Over 100 Eigenschappen Wacht op je verkenning! Klik hier om meer te ontdekken.

 

 

Comments (26)
No ratings yet. Be the first to rate!
Graham
Graham
This comment was minimized by the moderator on the site
You switched from 32 bit to 64 bit without explanation. See "New > DWORD (32-BIT Value)" then after "6. In the Edit QWORD (64-BIT)". Which is it ? Or is it both?
Reply
0
0
Amanda Lee
Amanda Lee     Graham
This comment was minimized by the moderator on the site
Sorry for the confusion. It should be the DWORD (32-bit) Value. And I've fixed it in the tutorial. 🙂
Reply
Report
0
0
jrlongoria@gmail.com
This comment was minimized by the moderator on the site
You change from DWORD to QWORD at the end.
It should be DWORD
Reply
Report
0
0
Amanda Lee
Amanda Lee    
This comment was minimized by the moderator on the site
Thank you for bringing this to my attention. I've made the necessary correction in the tutorial.
Reply
Report
0
0
Max
Max
This comment was minimized by the moderator on the site
Great! Thanks
Reply
0
0
Ethan H
Ethan H
This comment was minimized by the moderator on the site
This worked for me in Outlook for Office 365. Once point to clarify, the instructions flip-flop between DWORD and QWORD, which are mutually exclusive. I used DWORD and it worked.
Reply
0
0
FerretWilliams
FerretWilliams
This comment was minimized by the moderator on the site
I also didn't have a security folder. To get around the issue, I set a rule to forward all emails fitting a specific rule to IFTTT so I can use their automation instead. Won't work for everybody, and attachments get a long number added to them if saving to Dropbox.
Reply
0
0
dan
dan     FerretWilliams
This comment was minimized by the moderator on the site
what applet did you use on IFTTT, or did you make your own?
Reply
0
0
FerretWilliams
FerretWilliams     dan
This comment was minimized by the moderator on the site
I set an email trigger, and set the action to be to save to Dropbox. However, I've since switched to Microsoft Flow for saving Gmail directly to Dropbox. My specific goal was to save Gmail attachments to Dropbox, and Flow worked best for that after IFTTT dropped support for reading emails from Gmail.
Reply
0
0
Sagar
Sagar
This comment was minimized by the moderator on the site
I Don't Have a security folder after HKEY_CURRENT_USER\Software\Microsoft\Office\16.0\Outlook
Reply
0
0
IT Engineer
IT Engineer     Sagar
This comment was minimized by the moderator on the site
It's because Microsoft has yet again changed something concerning this feature. Most likely, this registry key path has completely changed, or has been outright omitted. I have a Premier Support ticket open with MS currently to have them provide us the CORRECT registry setting for Office2016/2019 current monthly channel to bring the Run a Script in Rules Actions back. It is completely unacceptable for MS to continue to alter/omit features like this without clear & priority notification to clients. I understand the security risks behind using such a feature, but in certain scenarios, this still is used.
Reply
0
0
Azza
Azza     IT Engineer
This comment was minimized by the moderator on the site
By playing around I found the correct key:
Computer\HKEY_USERS\{whichevertheuserkeyis}\Software\Microsoft\Office\16.0\Outlook\Security

So do not use HKEY_Current_User, instead use HKEY_USERS
Reply
0
0
Jason
Jason
This comment was minimized by the moderator on the site
This doesn't seem to work for Outlook 2013. Is there a method that will work for this version? Also, your instructions reference DWORD and the images imply QWORD.
Reply
0
0
Lukie
Lukie     Jason
This comment was minimized by the moderator on the site
For 2013 I used HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\Security and DWORD EnableUnsafeClientMailRules with value 1.
Each version of office has its own folder in "HKEY_CURRENT_USER\Software\Microsoft\Office\"

You also need to allow the macro to run in outlook 2013:

File -> Options -> Trust Centre -> Trust centre settings
-> Macro settings -> "Notifications for all macros"

This will ask you to allow the macro the first time the rule runs, but be careful not to allow any other unknown macros during day to day use. You could also use a digitally signed macro, and only allow digitally signed ones to run.

Then create your script, create a rule that runs it, and you should be set.
Reply
0
0
Marine
Marine     Lukie
This comment was minimized by the moderator on the site
Did not work for me.  I have Outlook 2013, but maybe now that Office 365 has overstepped this setting somehow.  I have the trust settings enabled to notify for all Macros.
Reply
0
0
Espen
Espen
This comment was minimized by the moderator on the site
DWORD or QWORD? A bit confusing to understand which to use... Had to create DWORD to make it work. Thanks
Reply
0
0
Rafal
Rafal
This comment was minimized by the moderator on the site
Do You have instructions how to enable this option also for outlook 2010?
Reply
0
0
abhi
abhi
This comment was minimized by the moderator on the site
Thank You! It worked for me and as mentioned in one of the comments below, Step 6 was DWORD dialogue box for me.
Reply
0
0
There are no comments posted here yet
Load More
Please leave your comments in English
Guest
Posting as Guest
×
Rate this post:
Reset
0   Characters
Suggested Locations