Ga naar hoofdinhoud

 Hoe selecteer ik een kolom op basis van de kolomkop in Excel?

Stel dat u een groot werkblad heeft dat meerdere kolommen bevat, en nu wilt u de specifieke kolom selecteren op basis van de naam van een kolomkop. Om de kolom voor kolom in een groot werkblad te vinden, zal veel tijd worden verspild, in dit artikel zal ik een snelle methode introduceren om deze taak in Excel op te lossen.

Selecteer een kolom op basis van de naam van de kolomkop met VBA-code


Selecteer een kolom op basis van de naam van de kolomkop met VBA-code

De volgende VBA-code kan u helpen om de kolommen te selecteren op basis van een specifieke koptekstnaam, doe dit als volgt:

1. Houd de ALT + F11 toetsen om de te openen Microsoft Visual Basic voor toepassingen venster.

2. Klikken Invoegen > Moduleen plak de volgende code in het Module Venster.

VBA-code: selecteer een kolom op basis van de naam van de kolomkop:

Sub FindAddressColumn()
'Updateby Extendoffcie
    Dim xRg As Range
    Dim xRgUni As Range
    Dim xFirstAddress As String
    Dim xStr As String
    On Error Resume Next
    xStr = "Name"
    Set xRg = Range("A1:P1").Find(xStr, , xlValues, xlWhole, , , True)
    If Not xRg Is Nothing Then
        xFirstAddress = xRg.Address
        Do
            Set xRg = Range("A1:P1").FindNext(xRg)
            If xRgUni Is Nothing Then
                Set xRgUni = xRg
            Else
                Set xRgUni = Application.Union(xRgUni, xRg)
            End If
        Loop While (Not xRg Is Nothing) And (xRg.Address <> xFirstAddress)
    End If
    xRgUni.EntireColumn.Select
End Sub

Note: In de bovenstaande code, A1: P1 is het bereik van kopteksten waaruit u kolommen wilt selecteren, en 'Naam”In het script xStr = "Naam" is de koptekstnaam waarop u kolommen wilt selecteren op basis van. Wijzig ze naar uw behoefte.

3. Druk na het kopiëren en plakken van de code op F5 sleutel om deze code uit te voeren, en alle kolommen met de specifieke koptekstnaam zijn in één keer geselecteerd, zie screenshot:

Beste Office-productiviteitstools

🤖 Kutools AI-assistent: Een revolutie teweegbrengen in de data-analyse op basis van: Intelligente uitvoering   |  Genereer code  |  Aangepaste formules maken  |  Analyseer gegevens en genereer grafieken  |  Roep Kutools-functies aan...
Populaire functies: Zoek, markeer of identificeer duplicaten   |  Verwijder lege rijen   |  Combineer kolommen of cellen zonder gegevens te verliezen   |   Ronde zonder formule ...
Super opzoeken: Meerdere criteria VLookup    VLookup met meerdere waarden  |   VOpzoeken over meerdere bladen   |   Fuzzy opzoeken ....
Geavanceerde vervolgkeuzelijst: Maak snel een vervolgkeuzelijst   |  Afhankelijke vervolgkeuzelijst   |  Multi-select vervolgkeuzelijst ....
Kolom Beheerder: Voeg een specifiek aantal kolommen toe  |  Kolommen verplaatsen  |  Schakel de zichtbaarheidsstatus van verborgen kolommen in  |  Vergelijk bereiken en kolommen ...
Uitgelichte functies: Raster focus   |  Ontwerpweergave   |   Grote formulebalk    Werkmap- en bladbeheer   |  resource Library (Auto-tekst)   |  Datumkiezer   |  Combineer werkbladen   |  Cellen coderen/decoderen    Stuur e-mails per lijst   |  Super filter   |   Speciaal filter (filter vet/cursief/doorhalen...) ...
Top 15 gereedschapsets12 Tekst Tools (toe te voegen tekst, Tekens verwijderen, ...)   |   50+ tabel Types (Gantt Chart, ...)   |   40+ Praktisch Formules (Bereken leeftijd op basis van verjaardag, ...)   |   19 Invoeging Tools (QR-code invoegen, Afbeelding invoegen vanaf pad, ...)   |   12 Camper ombouw Tools (Getallen naar woorden, Currency Conversion, ...)   |   7 Samenvoegen en splitsen Tools (Geavanceerd Combineer rijen, Gespleten cellen, ...)   |   ... en meer

Geef uw Excel-vaardigheden een boost met Kutools voor Excel en ervaar efficiëntie als nooit tevoren. Kutools voor Excel biedt meer dan 300 geavanceerde functies om de productiviteit te verhogen en tijd te besparen.  Klik hier om de functie te krijgen die u het meest nodig heeft...

Omschrijving


Office-tabblad Brengt een interface met tabbladen naar Office en maakt uw werk veel gemakkelijker

  • Schakel bewerken en lezen met tabbladen in Word, Excel, PowerPoint in, Publisher, Access, Visio en Project.
  • Open en maak meerdere documenten in nieuwe tabbladen van hetzelfde venster in plaats van in nieuwe vensters.
  • Verhoogt uw productiviteit met 50% en vermindert honderden muisklikken voor u elke dag!
Comments (8)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Good job, works great!
This comment was minimized by the moderator on the site
Hi everyone...

How can I make it so that only the column data is selected, without the header, instead of the entire column?

Thanks
This comment was minimized by the moderator on the site
Thank you spo much saved my day !
This comment was minimized by the moderator on the site
Thanks - at first it seemed to work, but then I noticed it didn't include the first-found column - it started with the second and on.

Which is explainable: you set xRg twice, but you do not include the first one.

TBH: initially I thought it worked fine, but then that 'error' showed up and I had to figure out why....

I fixed it as follows: (in Excel the comments will turn green and show my edits: '***)

<code>

Sub FindAddressColumn()

'Updateby Extendoffcie

Dim xRg As Range

Dim xRgUni As Range

Dim xFirstAddress As String

Dim xStr As String

On Error Resume Next
xStr = "Name"
Set xRg = Range("A1:P1").Find(xStr, , xlValues, xlPart, , , True)

If Not xRg Is Nothing Then

xFirstAddress = xRg.Address

Do

If xRgUni Is Nothing Then

Set xRgUni = Range(xFirstAddress) '*** Using the first-found range

Else

Set xRgUni = Application.Union(xRgUni, xRg)

End If



Set xRg = Range("A1:P1").FindNext(xRg) '*** Now searching for the second/next ones



Loop While (Not xRg Is Nothing) And (xRg.Address <> xFirstAddress)

End If

xRgUni.EntireColumn.Select

End Sub


</code>

This now works for me, but I hope to learn from you if I overlooked anything.
This comment was minimized by the moderator on the site
Hi, Can you suggest the macro for the issue mentioned below by Shaun
This comment was minimized by the moderator on the site
Hi, looks great work. But I am getting the compile error: Argument not optional while highlighting the ". Union". What should I do?
This comment was minimized by the moderator on the site
This is great, but what if I wanted to copy say, CustomerName, OrderNumber, OrderDate, FulfillmentDate, OrderStatus from Sheet1 with many more columns.
How do I only specify the columns that are needed to be copied to another sheet? This seems to only specify one column.
I have tried some things, but the problem is more where the columns are not necesarily in the same order on the source sheet. The source data in Sheet1 is pasted from the Windows clipboard to the Excel sheet.

It may be, CustomerName, OrderDate, OrderNumber, OrderStatusm FulfillmentDate or some other order.

I need them to be copied into a new sheet in a specific order as there are formulas in Sheet2 that are applied to what is copied from Sheet1 to Sheet2.

Other than shifting columns around after pasting from Windows clipboard, I can't figure this out.

Please help if possible.

Thank you kindly for the above though.
This comment was minimized by the moderator on the site
Dim xRg As Range
Dim xRgUni As Range
Dim xFirstAddress As String
Dim xStr As String

Are variables being declared.

Hence to use the above code again for another column you would have to declare new variables.

Dim xRg2 As Range
Dim xRgUni2 As Range
Dim xFirstAddress2 As String
Dim xStr2 As String

And replace every instance of xRg with xRg2 in the code ect. Does that make sense?
There are no comments posted here yet
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations