Ga naar hoofdinhoud

Hoe cellen te vergrendelen of te beschermen na gegevensinvoer of invoer in Excel?

Stel dat u een werkblad heeft en slechts een bepaald bereik van lege cellen heeft gegevensinvoer nodig, en nadat u klaar bent met het invoeren van gegevens, moet u de cellen automatisch vergrendelen om te voorkomen dat wijzigingen opnieuw worden aangebracht. Hoe kunt u dit bereiken? Dit artikel kan je daarbij helpen.

Vergrendel of bescherm cellen na gegevensinvoer of invoer met VBA-code


Vergrendel of bescherm cellen na gegevensinvoer of invoer met VBA-code

Het bepaalde bereik van lege cellen is bijvoorbeeld A1: F8. Ga als volgt te werk om deze cellen te vergrendelen na het invoeren van gegevens in Excel.

1. Ontgrendel eerst dit bereik, selecteer de cellen en klik met de rechtermuisknop, en kies dan Cellen opmaken in het rechtsklikmenu en in het Cellen opmaken dialoogvenster en verwijder het vinkje bij Vergrendeld doos onder de bescherming tabblad, en tenslotte op het OK knop. Zie screenshot:

2. klikken Review > Bescherm het blad. En geef een wachtwoord op om dit werkblad te beschermen.

3. Klik met de rechtermuisknop op de bladtab en selecteer Bekijk code vanuit het rechtsklikmenu. Kopieer en plak vervolgens de onderstaande VBA-code in het codevenster. Zie screenshot:

VBA-code: cellen vergrendelen of beveiligen na invoer of invoer van gegevens

Dim mRg As Range
Dim mStr As String

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
If Not Intersect(Range("A1:F8"), Target) Is Nothing Then
    Set mRg = Target.Item(1)
    mStr = mRg.Value
End If
End Sub
Private Sub Worksheet_Change(ByVal Target As Range)
    Dim xRg As Range
    On Error Resume Next
    Set xRg = Intersect(Range("A1:F8"), Target)
    If xRg Is Nothing Then Exit Sub
    Target.Worksheet.Unprotect Password:="123"
    If xRg.Value <> mStr Then xRg.Locked = True
    Target.Worksheet.Protect Password:="123" 
End Sub
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Intersect(Range("A1:F8"), Target) Is Nothing Then
    Set mRg = Target.Item(1)
     mStr = mRg.Value
End If
End Sub

Note: In de code is "A1: F8" het bereik dat u nodig hebt om gegevens in te voeren; en "123" is het wachtwoord van dit beveiligde werkblad. Wijzig ze indien nodig.

4. druk op anders + Q toetsen tegelijk om het Microsoft Visual Basic voor toepassingen venster.

Nadat u klaar bent met het invoeren van gegevens in de cellen van bereik A1: F8, worden ze automatisch vergrendeld. En u krijgt een promptvenster als u probeert om celinhoud van dit bereik te wijzigen. Zie screenshot:


Gerelateerde artikelen:

Beste Office-productiviteitstools

🤖 Kutools AI-assistent: Een revolutie teweegbrengen in de data-analyse op basis van: Intelligente uitvoering   |  Genereer code  |  Aangepaste formules maken  |  Analyseer gegevens en genereer grafieken  |  Roep Kutools-functies aan...
Populaire functies: Zoek, markeer of identificeer duplicaten   |  Verwijder lege rijen   |  Combineer kolommen of cellen zonder gegevens te verliezen   |   Ronde zonder formule ...
Super opzoeken: Meerdere criteria VLookup    VLookup met meerdere waarden  |   VOpzoeken over meerdere bladen   |   Fuzzy opzoeken ....
Geavanceerde vervolgkeuzelijst: Maak snel een vervolgkeuzelijst   |  Afhankelijke vervolgkeuzelijst   |  Multi-select vervolgkeuzelijst ....
Kolom Beheerder: Voeg een specifiek aantal kolommen toe  |  Kolommen verplaatsen  |  Schakel de zichtbaarheidsstatus van verborgen kolommen in  |  Vergelijk bereiken en kolommen ...
Uitgelichte functies: Raster focus   |  Ontwerpweergave   |   Grote formulebalk    Werkmap- en bladbeheer   |  resource Library (Auto-tekst)   |  Datumkiezer   |  Combineer werkbladen   |  Cellen coderen/decoderen    Stuur e-mails per lijst   |  Super filter   |   Speciaal filter (filter vet/cursief/doorhalen...) ...
Top 15 gereedschapsets12 Tekst Tools (toe te voegen tekst, Tekens verwijderen, ...)   |   50+ tabel Types (Gantt Chart, ...)   |   40+ Praktisch Formules (Bereken leeftijd op basis van verjaardag, ...)   |   19 Invoeging Tools (QR-code invoegen, Afbeelding invoegen vanaf pad, ...)   |   12 Camper ombouw Tools (Getallen naar woorden, Currency Conversion, ...)   |   7 Samenvoegen en splitsen Tools (Geavanceerd Combineer rijen, Gespleten cellen, ...)   |   ... en meer

Geef uw Excel-vaardigheden een boost met Kutools voor Excel en ervaar efficiëntie als nooit tevoren. Kutools voor Excel biedt meer dan 300 geavanceerde functies om de productiviteit te verhogen en tijd te besparen.  Klik hier om de functie te krijgen die u het meest nodig heeft...

Omschrijving


Office-tabblad Brengt een interface met tabbladen naar Office en maakt uw werk veel gemakkelijker

  • Schakel bewerken en lezen met tabbladen in Word, Excel, PowerPoint in, Publisher, Access, Visio en Project.
  • Open en maak meerdere documenten in nieuwe tabbladen van hetzelfde venster in plaats van in nieuwe vensters.
  • Verhoogt uw productiviteit met 50% en vermindert honderden muisklikken voor u elke dag!
Comments (75)
Rated 5 out of 5 · 1 ratings
This comment was minimized by the moderator on the site
Good day, what I want to do is quite similar to the presented code however, the code only caters for individual data entry. My case is that I have a data entry interface but the given code doesn't follow the formulas before the selected cells which is substantial in my situation. Please, help me to resolve this. Thank you so much :D
This comment was minimized by the moderator on the site
I want to lock a particular range after an entry and allow only one entry in that range.
the range already contains a data validation.
This comment was minimized by the moderator on the site
Hi Rakesh Chand,
Assuming the specific range is A1:D7, when you select an entry in any data validation of that range, the worksheet will be protected.
Please apply the following VBA code to get it done.

Private Sub Worksheet_Change(ByVal Target As Range)
'Updated by Extendoffice 20220831
    Dim xRg As Range
    Dim Rg As Range
    On Error Resume Next
    Set Rg = Range("A1:D7")
    Set xRg = Intersect(Rg, Target)
    If xRg Is Nothing Then Exit Sub
       
    Rg.Locked = True
    
        Rg.Worksheet.Protect Password:="123"
    
End Sub
This comment was minimized by the moderator on the site
доброго времени суток!
Возможно ли с помощью кода сделать следующие?
Есть таблица, к примеру 6 столбцов, в которую последовательно вносят данные в 5 столбов (присутствует режим "выбор из списка данных" и формулы), а в 6-ом выбирается фамилия вносившего. Возможно ли блокировать полностью строку с внесенными данными, только после заполнения последней ячейке в этой строке (6-ой столбец)?
Выше указанный способ блокирует ввод данных в ячейки где есть выбор из списка данных на всём листе.
Если есть такой вариант, буду очень признателен за код.
Заранее Спасибо!
Rated 5 out of 5
This comment was minimized by the moderator on the site
Hi I am having an error with the deletion. Whenever I tried to click the delete the record a pop up will say "Microsoft Excel will permanently delete this sheet. Do you want to continue'.

Here's the code that I am using:

Sub Deletion()

Dim iRow As Long
Dim iSerial As Long


iSerial = Application.InputBox("Please enter Serial No. to delete the record.", "Delete", , , , , , 1)

On Error Resume Next

iRow = Application.WorksheetFunction.IfError _
(Application.WorksheetFunction.Match(iSerial, Sheets("Database").Range("A:A"), 0), 0)

On Error GoTo 0

If iRow = 0 Then

MsgBox "No record found.", vbOKOnly + vbCritical, "No Record"
Exit Sub

End If

Sheets("Database").Cells(iRow, 1).EntireRow.Delete Shift:=xlUp

End Sub


Please help me fix it. Thanks!
This comment was minimized by the moderator on the site
Hi guys. I need help and I'm new with VBA.
Say, I have Column BH with dropdown choices for Confirmed, Pending, and Cancelled.
All columns must remain unlocked for editing except for Columns A, BD, BE, and BF which must remain lock all the time.
If "Confirmed" is selected on Column BH, I want to lock the entire row before/next to it. Then, a password must be used if I want to edit the "Confirmed" row.
Can someone help me with this please?
Thanks in advance.

This comment was minimized by the moderator on the site
Good day...
Your tutorial is great!
I ran across a Run-Time error '13': during selection change if I select entire row. What is the turn-around for this? Any insight is much appreciated.
This comment was minimized by the moderator on the site
Hi,Which Excel version are you using?
This comment was minimized by the moderator on the site
Hi, This is all new to me. The formula is great. I want to lock cells D6:D36, H6:H35 & L6:L35 but can't get this to work. any help would be greatly appreciated.
This comment was minimized by the moderator on the site
Hi simon,If you want to lock cells in D6:D36, H6:H35 and L6:L35 separately after finish entering data in each range. Please do as follows.1. Select these three ranges by holding the Ctrl key;2. Do as the post described in step 1 to unlock these three ranges;3. Protect your worksheet with a password (Here my password is 123. This password will be used in the below code);4. Right click the sheet tab and then paste the below VBA code into the Code editor, and then press Alt + Q keys to close the Microsoft Visual Basic for Applications window.Notes: 1) In the code, you can change the ranges and password as you need;2)After pressing Alt + Q keys to close the code window, you need to shift to another worksheet and then go back to current sheet to make the code work. Otherwise, error will be occurred.<div data-tag="code">Dim mRg As Range
'Updated by Extendoffice 20201030
Dim mStr As String
Dim mStrAddress As String
Dim mArr
Private Sub Worksheet_Activate()
On Error Resume Next
Erase mArr()
mStrAddress = "D6:D36,H6:H35,L6:L35"
mArr = Split(mStrAddress, ",")
End Sub

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim xI As Integer
For xI = 0 To UBound(mArr)
If Not Intersect(Range(mArr(xI)), Target) Is Nothing Then
Set mRg = Target.Item(1)
mStr = mRg.Value
Exit For
End If
Next
End Sub
Private Sub Worksheet_Change(ByVal Target As Range)
Dim xRg As Range
Dim xI As Integer
On Error Resume Next
For xI = 0 To UBound(mArr)
Set xRg = Null
Set xRg = Intersect(Range(mArr(xI)), Target)
If Not (xRg Is Nothing) Then
Target.Worksheet.Unprotect Password:="123"
If xRg.Value <> mStr Then xRg.Locked = True
Target.Worksheet.Protect Password:="123"

End If
Next
End Sub
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim xI As Integer
On Error Resume Next
For xI = 0 To UBound(mArr)
If Not Intersect(Range(mArr(xI)), Target) Is Nothing Then
Set mRg = Target.Item(1)
mStr = mRg.Value
End If
Next
End Sub
This comment was minimized by the moderator on the site
If Not Intersect(Range("CUSTOMER!"), Target) Is Nothing Then
I got an error. I want to protect the whole sheet
This comment was minimized by the moderator on the site
Good afternoon ... thank you again for this great resource. I do have one question. We have a shared document that is used by multiple users for input purposes. We have noticed that if User A enters data in a given cell, User A cannot edit per the code above (which is exactly what we want) but User B who the document is also shared with can delete the data that User A entered. Is there a revision for the code above that could be included in a shared document that has multiple users that are entering data.
This comment was minimized by the moderator on the site
Hi
I want to auto lock cell while i'm saving my worksheet
Can you help me how to do this in vba
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations